Sakura Tissue-Tek Oct Compound [4583]  shipping weight: 5 LB Sakura Tissue-Tek OCT Compound This optimum cutting temperature (O.C.T.) formulation of water-soluble glycols and resins provides a convenient specimen matrix for cryostat sectioning at temperatures of -10o C and below. Leaves no residue on slides during staining procedure, eliminating undesirable background staining. 4 oz. bottle. 12 bottles per case inert mounting medium OCT Sakura

TissueTec OCT

• Sakura Accu-Edge Microtome Blades [S-ACCU-EDGE]  shipping weight: 1 LB Sakura Accu-Edge disposable blades. Designed for both high and low profile laboratory systems. Dust-free blade dispenser automatically positions new blade accurately while displacing used blade from holder. 50-blade dispenser pack safely stores used blades. 10 packs per case.

• Sakura Coverslipping Film Tape [4770]  shipping weight: 15 LB Sakura Coverslipping Film Tape IMEB is an industrial distributor for all Sakura products. Cellulose tri-acetate film coated with a xylene activated resin on the lower surface. The flexible film tape with opitcal clarity comparable to glass is automatically applied to the slide, eliminating use of sticky mounting media and extended direct xylene contact. Each roll can coverslip 1000 slides. Sold only in cases of 5 rolls per case.

• Sakura Cryomolds [4557]  shipping weight: 1 LB Tissue-Tek® Cryomold® creates a uniformly shaped, flat-surface specimen blocks with O.C.T. Compound for frozen sectioning. Disposable plastic molds fit Cryobar® freezing wells. Available in 3 sizes: standard (25x20x5mm) fits directly into the Cryobar® freezing wells, biopsy (10x10x5mm) and intermediate (15x15x5mm) require adapters for optimum uniform freezing in the Cryobar®. Cryomolds® are provided 100 per package. The Cryobar® adapters are provided 12 per case.

• Sakura Tissue-Tek Mold Release Concentrate [4141]  shipping weight: 5 LB Sakura Tissue-Tek Mold Release Compound For coating base mold to ensure clean separation of embedding paraffin from mold. Working solution is prepared by adding 5ml of release compound to 95ml of ethyl or isopropyl alcohol. Molds are dipped in solution and dried prior to paraffin filling. 12 4oz bottles per package.

• Sakura Tissue-Tek Cold Plate [STTCOLD] SAKURA TISSUE TEK COLD PLATE For use in chilling and preparing paraffin blocks for sectioning at micro- tome and as cold tray for other laboratory procedures. Polystyrene top and base are molded together for tight seal. Freezes in approximately 4 hours in conventional freezer. Surface remains fold for up to 3 hours.

• Formalin Neutralizers [NEUTRALEX] Contains 16 Pre-measured Pouches Aldehyde Test Kit 9.5 liter (2.5 gallons) Reaction Container The Tissue-Tek® Neutra-Guard® Aldehyde Control System includes four unique products: Tissue-Tek® Neutralex® Tissue-Tek® Neutra-Pads® Tissue-Tek® Neutra-Wipes® Tissue-Tek® Neutra-Form® Each is designed to deliver safe, efficient and economical results for the treatment of formalin waste. Eliminating exposure to hazardous chemicals, the Tissue-Tek® Neutra-Guard® Aldehyde Control System is the only CAL/EPA-certified treatment for formalin waste. With this extraordinary system, you’ll have confidence that your lab meets all federal, state and local ordinances. 4046 Starter Kit Inc.16 Pre-measured pouches Aldehyde Test Kit & 2.5 gallon container 4047 16 Pre-measured pouches (Each pouch neutralizes 1 gallon) 4050 Aldehyde Test Kit (100 strips ) 4276 2.5 gallon Reaction Container 4278 Starter Pack Neutra-Wipes Inc. (1 Dispenser & 1 roll of wipes) 4279 Neutra-Wipes 4 Rolls (60 wipes per roll) 4295 Neutra-Pads 100 pads 4304 Neutra-Form 2 Containers of 1.4 kg each

• Tissue Tek Microtome Disposable Blades [4980]  shipping weight: 1 LB Ultrasharp blades section specimens without striations, distortion, or chattering. Dispenser delivers new blade in seconds, automatically ejecting used blade. Holds 50 blades. Low-Profile blades fits all Accu-Edge Blade Holders for microtomy and cryotomy: 4687, 4683, 4680, 4681, 4682. High profile blades are compatible with holders designed for disposable blades 14.0mm in height. 50 blades per dispenser. 10 dispensers per case.

• Tissue - Tek II Stainless Steel Base Molds [SSBM]  shipping weight: 1 LB TISSUE-TEK Stainless Steel Base Molds For use with embedding cassettes. 6mm (1/4”) deep molds are reusable stainless steel with extended fins to prevent tipping and provide gripping surface for easy handling. 12 per package.

• SAKURA NEUTRA-FORM [4304] SAKURA NEUTRA-FORM Container size: 1.4 kg two containers included in order Tissue-Tek® Neutra-Form® Each is designed to deliver safe, efficient and economical results for the treatment of formalin waste. Eliminating exposure to hazardous chemicals, the Tissue-Tek® Neutra-Guard® Aldehyde Control System is the only CAL/EPA-certified treatment for formalin waste. With this extraordinary system, you’ll have confidence that your lab meets all federal, state and local ordinances.

• SAKURA PRE-MEASURED POUCHES [4047]  shipping weight: 5 LB SAKURA PRE-MEASURED POUCHES (Formalin Neutralizer) 16 Pre-measured pouches (Each pouch neutralizes 1 gallon)

• SAKURA ALDEHYDE TEST KIT [4050]  shipping weight: 4.5 LB SAKURA ALDEHYDE TEST KIT (Formalin Neutralizer) Aldehyde Test Kit (100 strips )

• SAKURA REACTION CONTAINER 2.5 GALLON [4276]  shipping weight: 5 LB SAKURA REACTION CONTAINER 2.5 GALLON (Formalin Neutralizer) 2.5 gallon Reaction Container

• SAKURA STARTER PACK Neutra-Wipes [4278] SAKURA STARTER PACK Neutra-Wipes (Formalin Neutralizer)

• SAKURA NEUTRA-WIPES STARTER PACK [4279] SAKURA NEUTRA-WIPES STARTER PACK (Formalin Neutralizer) Includes 1 Dispenser & 1 roll wipes. Wipe Size. 12” x 12.5”

• SAKURA NEUTRA-PADS (100 PADS) [4295] SAKURA NEUTRA-PADS (100 PADS) Neutra-Pads Pad size 8” x 10” Each is designed to deliver safe, efficient and economical results for the treatment of formalin waste. Eliminating exposure to hazardous chemicals, the Tissue-Tek® Neutra-Guard® Aldehyde Control System is the only CAL/EPA-certified treatment for formalin waste. With this extraordinary system, you’ll have confidence that your lab meets all federal, state and local ordinances.

• Tissue Tek Mega Cassette [4173] For larger , thicker specimens including bone, eye and teeth, 30 x 24 x 11mm. White only.750 per cs. $149.00

• Sakura Tissue-Tek Filing Cabinet [4192]  shipping weight: 15 LB Sakura Tissue-Tek Filing Cabinet Permanent storage/reference unit for blocks embedded in Tissue-Tek embedding cassettes, rings and uni-cassette. Accommodates 1000 rings or 1500 cassettes. One piece construction eliminates hinges and doors for dust-free storage. Dimensions: 17” x 9-1/2” x 15”.