GENTAUR EUROPE  +32 1658 9045 +32 1650 9045BELGIUM tel +32 2 732 5688 fax +32 2 732 4414 info@gentaur.com Av. de l' Armée 68 B-1040 Brussels France tel 01 43 25 01 50 fax 01 43 25 01 60 9, rue Lagrange 75005 Paris Italy tel 02 36 00 65 93 fax 02 36 00 65 94 20135 Milano Germany tel +32 16 58 90 45 fax +32 16 50 90 45 Forckenbeckstraße 6 D-52074 Aachen Japan tel +81 78 386 0860 fax +81 78 306 0296 Minaatojimaminami-manchi Chuo-ku, Kobe 065-0047  |
| Item No. | Products Descriptions | Unit Price Euro | ||
| Heal Force ® CO2 Incubators | Ex-Works | |||
| 7BZ-HF151-PK1 | Heal Force ® HF 151 UV CO2 incubator | 2.620 € | ||
|
|
1.Standard features: | |||
 |
* air-jacket direct heating system | |||
| * 151 liter internal volume * TCD CO2 sensor | ||||
| * soft touch control panel * outer door heating | ||||
| * error warning * auto-start function | ||||
| * inner safety glass door * HEPA filter for CO2 inlet | ||||
| * microprocessor PID temperature controller | ||||
| * temperature sensor made of platinum | ||||
| * temperature range ambient above 5℃ to 50℃ | ||||
| * deviation (at 37℃) ±0.1 * over-temperature protection | ||||
| * Alarm for over temperature & high/low CO2 inside Chamber, | ||||
| and overtime opening of outside door | ||||
 |
* smooth inner casing with rounded corners on all sides made of stainless steel | |||
| * UV light-151 for disinfection * Disinfection duration 30min | ||||
| * UV cut-off function in case glass door is open. | ||||
| * relative humidity ≥95% | ||||
| * Distilled water volume (Max.) 4L *Stackable | ||||
| * 220V, 50Hz * connected load 0.6KW | ||||
| *Standard Accessories included: | ||||
| a. 3 sets of shelves b. electric suction pump | ||||
| c. cylinder pressure regulator for CO2 cylinders | ||||
| 2. Optional accessories | ||||
| 7SB-HF90-TDJ | floor stand for 2 stacked incubators, WXDXH 585x637x200mm | 140 € | ||
| 7SB-HF90-TCJ | floor stand for 1 incubator, WXDXH 585x637x400mm | 185 € | ||
| 7GB-16GB-BZ1 | shelf(set), including:shelf*1 + shelf support*2 | 75 € | ||
| 7BZ-HF212-PK1 | Heal Force ® HF 212 UV CO2 incubator | 2.825 € | ||
 |
1.Standard features: | |||
| * air-jacket direct heating system | ||||
| * 212 liter internal volume * TCD CO2 sensor | ||||
| * soft touch control panel * outer door heating | ||||
| * error warning * auto-start function | ||||
| * inner safety glass door * HEPA filter for CO2 inlet | ||||
| * microprocessor PID temperature controller | ||||
| * temperature sensor made of platinum | ||||
| * temperature range ambient above 5℃ to 50℃ | ||||
|
|
* deviation (at 37℃) ±0.1 * over-temperature protection | |||
| * Alarm for over temperature & high/low CO2 inside Chamber, | ||||
| and overtime opening of outside door | ||||
| * smooth inner casing with rounded corners on all sides made of stainless steel | ||||
| * UV light-212 for disinfection * Disinfection duration 30min | ||||
| * UV cut-off function in case glass door is open. | ||||
| * relative humidity ≥95% | ||||
| * Distilled water volume (Max.) 4L *Stackable | ||||
| * 220V, 50Hz * connected load 0.77KW | ||||
| *Standard Accessories included: | ||||
| a. 3 sets of shelves b. electric suction pump | ||||
| c. cylinder pressure regulator for CO2 cylinders | ||||
| 2. Optional accessories | ||||
| 7SB-BB5060-TDJ | floor stand for 2 stacked incubators, WXDXH 910x665x200mm | 150 € | ||
| 7SB-BB5060-TCJ | floor stand for 1 incubator, WXDXH 910x665x490mm | 205 € | ||
| 7GB-5060GB-BZ1 | shelf(set), including:shelf*1 + shelf support*2 | 100 € | ||
| Item No. | Products Descriptions | Unit Price | ||
| Heal Force ® CO2 Incubators | Ex-Works | |||
| 7BZ-HF90-PK1 | Heal Force ® HF 90 CO2 incubator | 3.140 € | ||
|
|
1.Standard features: | |||
| * air-jacket direct heating system * over-temperature protection | ||||
| * 151 liter internal volume * TCD CO2 sensor | ||||
| * soft touch control panel * outer door heating | ||||
| * error warning * auto-start function | ||||
| * inner safety glass door * HEPA filter for CO2 | ||||
| * inner safety glass screen (3 pieces) | ||||
| * microprocessor PID temperature controller | ||||
| * temperature sensor made of platinum | ||||
| * temperature range ambient above 5℃ to 50℃ | ||||
| * deviation (at 37℃) ±0.1 * over-temperature protection | ||||
| * Alarm for over temperature & high/low CO2 inside Chamber, | ||||
| and overtime opening of outside door | ||||
| * smooth inner casing with rounded corners on all sides made of stainless steel | ||||
| * moist heating disinfection at 90℃ * disinfection duration 25 hours | ||||
| * relative humidity ≥95% | ||||
| * Distilled water volume (Max.) 3L *Stackable | ||||
 |
* 220V, 50Hz * connected load 0.6KW | |||
| *Standard Accessories included: | ||||
| a.3 sets of shelves b. electric suction pump | ||||
| c. cylinder pressure regulator for CO2 cylinders | ||||
| 2. Optional accessories | ||||
| 7SB-HF90-TDJ | floor stand for 2 stacked incubators, WXDXH 585x637x200mm | 140 € | ||
| 7SB-HF90-TCJ | floor stand for 1 incubator, WXDXH 585x637x400mm | 185 € | ||
| 7GB-16GB-BZ1 | shelf(set), including:shelf*1 + shelf support*2 | 75 € | ||
| 7BZ-HF240-PK1 | Heal Force ® HF240 CO2 incubator | 3.990 € | ||
 |
1.Standard features: | |||
| * air-jacket direct heating system | ||||
| * 240 liter internal volume * TCD CO2 sensor | ||||
| * soft touch control panel * outer door heating | ||||
| * error warning * auto-start function | ||||
| * inner safety glass door * HEPA filter for CO2 inlet | ||||
| * microprocessor PID temperature controller | ||||
| * temperature sensor made of platinum | ||||
| * temperature range ambient above 5℃ to 50℃ | ||||
| * deviation (at 37℃) ±0.1 * over-temperature protection | ||||
| * Alarm for over temperature & high/low CO2 inside Chamber, | ||||
| and overtime opening of outside door | ||||
| * smooth inner casing with rounded corners on all sides | ||||
| made of stainless steel | ||||
| * moist heating disinfection at 90℃ * disinfection duration 25 hours | ||||
| * relative humidity ≥95% | ||||
| * Distilled water volume (Max.) 3L *Stackable | ||||
| * 220V, 50Hz * connected load 0.6KW | ||||
| -Standard Accessories included: | ||||
| a. 3 sets of shelves b. electric suction pump | ||||
| c. cylinder pressure regulator for CO2 cylinders | ||||
| 2. Optional accessories | ||||
| floor stand for 2 stacked incubators | N/A | |||
| floor stand for 1 incubator | N/A | |||
| inner safety glass screen (6 pieces) | N/A | |||
| Item No. | Products Descriptions | Unit Price Euro | ||
| Heal Force ® CO2 Incubators | Ex-Works | |||
| 7BZ-HF160W-PK1 | Heal Force ® HF160W CO2 Incubator | 4.500 € | ||
| 1.Standard features: | ||||
 |
*water-jacketed heating system *Over temperature protectioin | |||
| * 185 liter internal volume *IR CO2 sensor | ||||
| *soft touch control panel *Out door heating | ||||
| *error warning *auto-zero function | ||||
| *inner safety glass door | ||||
| *HEPA filter for recyled CO2 inside Chamber | ||||
| *3 HEPA filters for CO2 inlet, temperature calibration inlet | ||||
| inlet and standby power inlet. | ||||
| *microprocessor PID temperature controller | ||||
| *temperature sensor made of platinum | ||||
| *relative humidity sensor | ||||
| *temperature range ambient above 5℃ to 55℃ | ||||
| *deviation(at 37℃)±0.1 *relative humidity ≥95% | ||||
| * Alarm for over temperature, high/low CO2 inside Chamber, | ||||
| low water level in water tank, overtime opening of outside door | ||||
| and HEPA filter life | ||||
| * LCD display for temperature, CO2, Relative Humidity and Error message | ||||
| *smooth inner casing with rounded corners on all sides | ||||
| made of stainless steel | ||||
| * Distilled water volume (Max.) 3L | ||||
| *220V,50Hz * connected load 0.33KW *Stackable | ||||
| -Standard Accessories: | ||||
| a.3 sets of shelves | ||||
| b.1 cylinder pressure regualtor for CO2 cylinders | ||||
| c.1 Water tray | ||||
| d.1 water funnel (for adding water) | ||||
| 2.Optional accessories | ||||
| floor stand for 2 stacked incubators | N/A | |||
| floor stand for 1 incubator | N/A | |||
| shelf(set),including:shelf*12+shelf support*2 | Available soon | |||
